Ring-Opening Polymerization of rac-ß-Butyrolactone Promoted by New Tetradentate Thioether-Amide Ligand-Type Zinc Complexes.

In this work, thioether-amide ligands featuring a combination of hard amide groups with soft donor groups have been employed to develop new zinc catalysts for the ring-opening polymerization of cyclic esters. All complexes were prepared in high yields through alkane elimination reactions with diethyl zinc and characterized using nuclear magnetic resonance (NMR) spectroscopy. Density functional theory (DFT) characterization provided insight into the parameters that influence catalytic activity, such as steric hindrance at the metal center, Lewis acidity and electronic density of thioether-amide ligands. In the presence of one equivalent of isopropanol, all complexes were active in the ring-opening polymerization of rac-ß-butyrolactone. Quantitative conversion of 100 monomer equivalents was achieved within 1 h at 80 °C in a toluene solution. Number-average molecular weights increased linearly with monomer conversion; the values were in optimal agreement with those expected, and polydispersity index values were narrow and relatively constant throughout the course of polymerization. The most active complex was also effective in the ring-opening polymerization of ε-caprolactone and L-lactide. To propose a reliable reaction path, DFT calculations were undertaken. In the first step of the reaction, the acidic proton of the alcohol is transferred to the basic nitrogen atom of the amide ligand coordinated to the zinc ion. This leads to the alcoholysis of the Zn-N bond and the formation of an alcoholate derivative that starts the polymerization. In subsequent steps, the reaction follows the classical coordination-insertion mechanism.

NSSN-Type Group 4 Metal Complexes in the Ring-Opening Polymerization of l-Lactide.

A new class of zirconium and hafnium complexes coordinated by linear dianonic tetradentate NSSN ligands is reported. The ligands feature two amide functions coupled with two thioether groups linked by a central flexible ethane bridge and two lateral rigid phenylene bridges and differ for the substituents on the aniline nitrogen atoms, i.e., isopropyl, cyclohexyl, or mesityl substituents: NSSN-iPr, NSSN-Cy, or NSSN-Mes. They were prepared by reacting 2-aminothiophenol with dibromoethane to afford the NSSN ligands without substituents on the aniline nitrogen atoms, which were subsequently alkylated through a reductive amination of acetone or cyclohexanone or palladium-catalyzed cross-coupling reaction with mesityl bromide. The corresponding zirconium and hafnium complexes 1-5 were obtained through a transamination reaction between the neutral ligands and Zr(NMe2)4 or Hf(NMe2)4 [(NSSN-iPr)Zr(NMe2)2 (1), (NSSN-Cy)Zr(NMe2)2 (2), (NSSN-Mes)Zr(NMe2)2 (3), (NSSN-iPr)Hf(NMe2)2 (4), and (NSSN-Cy)Hf(NMe2)2 (5)]. They were characterized in solution by NMR spectroscopy and in solid state by X-ray diffraction analysis (except for 3). All complexes present an octahedral coordination geometry with a fac-fac ligand wrapping and a cis relationship between the other two monodentate ligands. The catalytic performances of 1-5 in the ring-opening polymerization of cyclic esters were investigated. Complex 1 was the most active: its polymerization activity was superior to those generally displayed by zirconium complexes featuring OSSO ligands and compared well with those of the most active group 4 complexes operating in a toluene solution.

NIR multiphoton ablation of cancer cells, fluorescence quenching and cellular uptake of dansyl-glutathione-coated gold nanoparticles.

Theranostics based on two-photon excitation of therapeutics in the NIR region is an emerging and powerful tool in cancer therapy since this radiation deeply penetrates healthy biological tissues and produces selective cell death. Aggregates of gold nanoparticles coated with glutathione corona functionalized with the dansyl chromophore (a-DG-AuNPs) were synthesized and found efficient nanodevice for applications in photothermal therapy (PTT). Actually the nanoparticle aggregation enhances the quenching of radiative excitation and the consequent conversion into heat. The a-DG-AuNPs are readily internalized in Hep G2 where the chromophore acts as both antenna and transducer of the NIR radiation under two-photons excitation, determining efficient cell ablation via photothermal effect.

Phosphasalen group IV metal complexes: synthesis, characterization and ring opening polymerization of lactide.

We report the synthesis of a series of Zr and Ti complexes bearing phosphasalen which differs from salen by the incorporation of two P atoms in the ligand backbone. The reaction of phosphasalen proligands (1a-1c)H2 with Zr(CH2Ph)4 led to different products depending on the nature of the N,N-linker in the ligand. In the case of ethylene-linked phosphasalen, octahedral Zr complex 2a formed as a single stereoisomer in trans geometry. With the phenylene linker, it was shown by dynamic NMR spectroscopy that complex 2b exists as a mixture of trans and cis-ß isomers in solution, both enantiomers (Δ and Λ) of the cis-ß isomer being in fast equilibrium with respect to the NMR time-scale. The use of a propylene-linked phosphasalen proligand 1cH2 led to a mixture of complexes among which a binuclear Zr complex 2c bridged only by one phosphasalen ligand could be isolated and characterized. Addition of 2 equiv. of iPrOH to 2a and 2b afforded diisoproxy Zr complexes 3a and 3b as a mixture of trans and cis-ß isomers, the latter undergoing fast Δ/Λ isomerization in solution. Addition of B(C6F5)3 to 2a and 2b gave cationic monobenzyl Zr complexes 4a and 4b which have been further converted into cationic alkoxy Zr complexes 5a-b and 6a-b by alcoholysis with iPrOH and (S)-methyl-lactate, respectively. The reaction of the phosphasalen proligands with Ti(NMe2)4 proceeded diastereoselectively giving rise to Ti complexes 7a-c in octahedral geometry with cis-ß wrapping of the ligand. The complexes have been tested for the ROP of rac-lactide. The neutral phosphasalen Ti and Zr complexes showed only poor activity probably due to the encumbered and electron donating nature of the phosphasalen ligand. In contrast, the cationic Zr alkoxides 5a, 6a and 6b are effective initiators for the controlled and hetero-selective ROP of rac-lactide.

A Novel [OSSO]-Type Chromium(III) Complex as a Versatile Catalyst for Copolymerization of Carbon Dioxide with Epoxides.

A new chromium(III) complex, bearing a bis-thioether-diphenolate [OSSO]-type ligand, was found to be an efficient catalyst in the copolymerization of CO2 and epoxides to achieve poly(propylene carbonate), poly(cyclohexene carbonate), poly(hexene carbonate) and poly(styrene carbonate), as well as poly(propylene carbonate)(cyclohexene carbonate) and poly(propylene carbonate)(hexene carbonate) terpolymers.

Cyclic Polyester Formation with an [OSSO]-Type Iron(III) Catalyst.

The efficient formation of cyclic polyesters from the ring-opening polymerization of lactide, ϵ-caprolactone, and ß-butyrolactone catalyzed by a 1,4-dithiabutanedyl-2,2'-bis(4,6-dicumylphenol) [OSSO]-FeCl complex activated with cyclohexene oxide was achieved. The catalyst was very active (initial turnover frequency up to 2718 h-1 ), robust, and worked with a monomer/Fe ratio up to 10 000. The formation of cyclic polymers was supported by using high-resolution matrix-assisted laser desorption ionization (MALDI) MS, and the average ring size (≈5 kDa for cyclic polylactide) independent of the reaction conditions. A monometallic ring-opening polymerization/cyclization mechanism was proposed from the results of a kinetic investigation.

Cyclic(Alkyl)(Amino)Carbene (CAAC)-Supported Zn Alkyls: Synthesis, Structure and Reactivity in Hydrosilylation Catalysis.

The reactivity of ZnII dialkyl species ZnMe2 with a cyclic(alkyl)(amino)carbene, 1-[2,6-bis(1-methylethyl)phenyl]-3,3,5,5-tetramethyl-2-pyrrolidinylidene (CAAC, 1), was studied and extended to the preparation of robust CAAC-supported ZnII Lewis acidic organocations. CAAC adduct of ZnMe2 (2), formed from a 1:1 mixture of 1 and ZnMe2 , is unstable at room temperature and readily undergoes a CAAC carbene insertion into the Zn-Me bond to produce the ZnX2 -type species (CAAC-Me)ZnMe (3), a reactivity further supported by DFT calculations. Despite its limited stability, adduct 2 was cleanly ionized to robust two-coordinate (CAAC)ZnMe+ cation (5+ ) and derived into (CAAC)ZnC6 F5 + (7+ ), both isolated as B(C6 F5 )4 - salts, showing the ability of CAAC for the stabilization of reactive [ZnMe]+ and [ZnC6 F5 ]+ moieties. Due to the lability of the CAAC-ZnMe2 bond, the formation of bis(CAAC) adduct (CAAC)2 ZnMe+ cation (6+ ) was also observed and the corresponding salt [6][B(C6 F5 )4 ] was structurally characterized. As estimated from experimental and calculations data, cations 5+ and 7+ are highly Lewis acidic species and the stronger Lewis acid 7+ effectively mediates alkene, alkyne and CO2 hydrosilylation catalysis. All supporting data hints at Lewis acid type activation-functionalization processes. Despite a lower energy LUMO in 5+ and 7+ , their observed reactivity is comparable to those of N-heterocyclic carbene (NHC) analogues, in line with charge-controlled reactions for carbene-stabilized ZnII organocations.

Aerobic Oxidation and Oxidative Esterification of 5-Hydroxymethylfurfural by Gold Nanoparticles Supported on Nanoporous Polymer Host Matrix.

The aerobic oxidation and oxidative esterification of 5-hydroxymethylfurfural (HMF) catalyzed by gold nanoparticles (AuNPs) supported on a semicrystalline nanoporous multiblock copolymer matrix consisting of syndiotactic poly(styrene)-cis-1,4-poly(butadiene) (sPSB) have been investigated. Depending on the reaction parameters (support nanoporosity, presence of water, solvent, temperature, cocatalyst, oxygen pressure), the conversion of HMF can be finely addressed to the formation of the desired oxidation product, such as 2,5-diformylfuran (DFF), 5-formylfuran-2-carboxylic acid (FFCA), methyl 5-(hydroxymethyl)furan-2-carboxylate (MHMFC), dimethyl furan-2,5-dicarboxylate (DMFC), and furan-2,5-dicarboxylic acid (FDCA), under optimized reaction conditions. The AuNP-sPSB catalyst is highly effective and selective because the polymer support acts as a conveyor and concentrator of the reactants toward the catalytic sites.

Phenylene-Bridged OSSO-Type Titanium Complexes in the Polymerization of Ethylene and Propylene.

The dichloro titanium complexes (OSSO tBu)TiCl2 (1) and (OSSOCum)TiCl2 (2) bearing o-phenylene-bridged OSSO-type ligands [OSSO tBu-H = 6,6'-((1,2-phenylenebis(sulfanediyl))bis(methylene))bis(2,4-di-tert-butyphenol) and OSSOCum-H = 6,6'-((1,2-phenylenebis(sulfanediyl))bis(methylene))bis(2,4-bis(2-phenylpropan-2-yl)phenol)] were prepared and characterized. The X-ray structure of 1 revealed that Ti atom has an octahedral coordination geometry with an fac-fac wrapping of the [OSSO] ligand. In solution at 25 °C, 1 mainly retains the C 2 symmetric structure, whereas 2 shows an equilibrium between C 2- and C 1-symmetric stereoisomers. Activation of 2 with (Ph3C)[B(C6F5)4] led to a highly active catalytic system with an activity of 238 kgPE·molcat -1·bar-1·h-1; linear polyethylene with a T m of 122 °C and M w of 107 kDa were obtained under these conditions. Catalyst 1 displayed the moderate activity of 59 kgPE·molcat -1·bar-1·h-1. Gel permeation chromatography analysis revealed the formation of high-molecular-weight polyethylenes with very large distributions of the molecular weights, indicating a low control of the polymerization process, probably becaue of the presence of different active species in solution. Density functional theory investigation provides a rational for the relative high-molecular-weight polymers obtained with these complexes. The precatalyst 2 was also active in propylene polymerization producing atactic oligomers terminated with unsaturated end groups.

Stereorigid OSSO-Type Group 4 Metal Complexes in the Ring-Opening Polymerization of rac-Lactide.

The synthesis and characterization of a series of group 4 metal complexes of general formula {OSSOX}M(OR)2 (X = R = tBu, M = Zr (1); X = cumyl, M = Zr, R = tBu (2); X = cumyl, M = Ti, R = iPr (4); X = cumyl, M = Hf, R = tBu (5)) and {OSSOX}2Zr (X = Cl (3)) supported by o-phenylene-bridged bis(phenolato) ligands (OSSOtBu-H = 6,6'-((1,2-phenylenebis(sulfanediyl))bis(methylene))bis(2,4-di-tert-butyphenol); OSSOCum-H = 6,6'-((1,2-phenylenebis(sulfanediyl))bis(methylene))bis(2,4-bis(2-phenylpropan-2-yl)phenol); OSSOCl-H = 6,6'-((1,2-phenylenebis(sulfanediyl))bis(methylene))bis(2,4-dichlorophenol)) are described herein. Complexes 1-5 were readily obtained by σ-bond metathesis reactions between the proligand and the appropriate homoleptic metal precursor. The reaction with OSSOCl yielded the bis-ligand complex{OSSOCl}2Zr (3) regardless of the OSSOCl-H/Zr(OtBu)4 molar ratio or experimental conditions. All complexes were characterized in solution using NMR spectroscopy and, in the case of 2, by single-crystal X-ray diffraction experiments. These complexes show a fac-fac ligand wrapping and a cis relationship between the other two monodentate ligands; zirconium and hafnium complexes 1-3 and 5 are configurationally stable, whereas titanium complex 4 is fluxional in solution at room temperature. The complexes tested in the ring-opening polymerization (ROP) of racemic-lactide showed, except in the case of 3, moderate rates and good levels of polymerization control. Upon addition of an exogenous alcohol (isopropyl alcohol or tert-butyl alcohol) efficient binary catalytic systems were achieved. Polymerizations were well-controlled, as testified by the linear growth of the molecular weight as polymerization proceeded, narrow polydispersity indices, and molecular weights close to those expected on the basis of added alcohol amounts. Experimental and theoretical evidence is provided that ROP reactions operate according to an activated monomer mechanism.

Glycidol: an Hydroxyl-Containing Epoxide Playing the Double Role of Substrate and Catalyst for CO2 Cycloaddition Reactions.

Glycidol is converted into glycerol carbonate (GC) by coupling with CO2 in the presence of tetrabutylammonium bromide (TBAB) under mild reaction conditions (T=60 °C, PCO2 =1 MPa) in excellent yields (99 %) and short reaction time (t=3 h). The unusual reactivity of this substrate compared to other epoxides, such as propylene oxide, under the same reaction conditions is clearly related to the presence of a hydroxyl functionality on the oxirane ring. Density functional theory calculations (DFT) supported by 1 H NMR experiments reveal that the unique behavior of this substrate is a result of the formation of intermolecular hydrogen bonds into a dimeric structure, activating this molecule to nucleophilic attack, and allowing the formation of GC. Furthermore, the glycidol/TBAB catalytic system acts as an efficient organocatalyst for the cycloaddition of CO2 to various oxiranes.

Thioether-triphenolate bimetallic iron(III) complexes as robust and highly efficient catalysts for cycloaddition of carbon dioxide to epoxides.

The selective and effective synthesis of organic carbonates under mild conditions, starting from carbon dioxide and oxiranes, catalyzed by metal complexes is currently a focus of interest for both industrial and academic researchers. We recently developed a novel thioether-triphenolate iron(III) catalyst (Ct-BU) that has proven to be highly active for the coupling of CO2 with epoxides, resulting in cyclic organic carbonates under solvent-free conditions. In the current work, the properties of this novel class of catalysts were extensively investigated. In particular, the steric properties of the ligand were modulated by changing the substituents of the aromatic rings in order to obtain a deeper knowledge of the relationship between the complex structure and catalytic performance/selectivity for these iron complexes. Notably, the less steric demanding iron(III) CH complex synthesized shows, when activated by n-tetrabutylammonium bromide, an impressive turnover frequency (TOF) of 3800 h(-1) for the formation of propylene carbonate and glycerol carbonate which are, by far, the highest reported for an iron based catalyst and compares well with the most active catalyst based on other metals.

{2-[2,2-Bis(4,4-dimethyl-4,5-di-hydro-1,3-oxazol-2-yl-κN)prop-yl]pyridine}-dichlorido-iron(II).

The title compound,[FeCl2(C18H25N3O2)], has a distorted tetra-hedral Cl2N2 coordination of the Fe(II) atom as a result of the constraints imposed by the 2-[2,2-bis-(4,4-dimethyl-4,5-di-hydro-1,3-oxazol-2-yl)prop-yl]pyridine ligand. The pyridine ring is almost perpendicular to the six-membered chelated ring containing the metal atom [dihedral angle between their mean planes = 88.5 (1)°].

Iron and manganese pyridoxal-based complexes as fluorescent probes for nitrite and nitrate anions in aqueous solution.

Water-soluble iron and manganese pyridoxal-based complexes pyr2enFeCl (1) and pyr2enMnCl (2) (pyr2en = N,N'-ethylenebis(pyridoxylideneiminato) have been synthesized and characterized. Proof-of-principle results that the title complexes can be efficiently used as fluorescent probes for nitrite and nitrate detection are provided. The fluorescent complex pyr2enFeCl (1) selectively recognizes nitrate anions by fluorescent enhancement in an aqueous solution displaying high binding affinities. ESI-MS experiments clearly show the binding of these anions via the substitution of the chloride anion at the metal center. The pyridoxal-based manganese complexes of NO2(-) and NO3(-) have been isolated, and their structures have been established by single-crystal XRD. Density functional theory (DFT) calculations show that the substitution of the chloride anion at the metal center by the nitrite or nitrate anion is favored by the gain in the energies of hydration.

Ring-opening polymerization of cyclic esters by phenoxy-thioether complexes derived from biocompatible metals.

A series of novel Mg(II) and Zn(II) complexes of the form LMX or L2M, supported by phenoxy-thioether ligands bearing different substituents at the ortho position of the thiophenol rings [L(-) = 4,6-tBu2-OC6H2-2-CH2S(2-R-C6H4)(-)] [M = Zn, R = H, X = N(SiMe3)2 (1) and X = Et (2); M = Mg, X = n-Bu, R = H (3), R = CH3 (4), R = Br (5); M = Mg, R = H (6)], were synthesized and characterized. Reaction of the proper zinc precursor (Zn[N(SiHMe2)2]2 or ZnEt2) with one equivalent of the phenoxy-thioether proligand produced the corresponding amido (1) and ethyl (2) zinc complexes in high yields. The monoalkylmagnesium complexes (3-5) were all obtained by butane elimination reaction of the dialkylmagnesium reagent, Mg(n-Bu)2, with one equivalent of the proligand in good yields. The homoleptic complex 6 was obtained by reaction of 0.5 equivalent of Mg(n-Bu)2 and the proper proligand. Variable temperature (1)H NMR studies performed on 2 and 3 demonstrated that the named complexes are involved in fluxional processes concerning a fast conformational change of the six-membered metallacycle. DOSY (Diffusion Ordered SpectroscopY) (1)H experiments and ligand scrambling strongly suggested that complexes 1-6 exist as dimeric species in solution. All complexes were active as catalysts in the ring-opening polymerization of cyclic esters. In particular, magnesium complexes showed superior ε-caprolactone and lactide ROP behavior in terms of activity, control of molecular weights and molecular weight distributions.

Rare earth complexes of phenoxy-thioether ligands: synthesis and reactivity in the ring opening polymerization of cyclic esters.

The potential of the phenoxy-thioether moieties as ancillary ligands in the coordination chemistry of group 3 metals was explored. The amine elimination reactions between yttrium and scandium amido precursors {M [N(SiHMe2)2]3 (THF)n} with the proligands {4,6-tBu2-OC6H2-2-CH2S(2-R-C6H4)}H [R = H (L1-H), CH3 (L2-H), Br (L3-H), CF3 (L4-H)], bearing different substituents at the ortho position of the thiophenol aryl ring, were studied. The outcome of aminolysis reactions gave different results depending on the structure of the proligand and the reaction conditions. Heteroleptic scandium and yttrium amido complexes with general formula {(L)2M [N(SiHMe2)2] (THF)n} were prevailingly obtained from phenoxy-thioether proligands L1-H and L4-H. In contrast, homoleptic yttrium complexes bearing three phenoxy-thioether ligands were favored with L2-H and L3-H. The activities of all the synthesized complexes toward the ring-opening polymerization of ε-caprolactone and L- and rac-lactide were investigated, also in combination with an alcohol as an external chain transfer agent. Polyesters with controlled molecular parameters (Mn, end groups) and low polydispersities were obtained. The monoinsertion adduct, produced by the reaction of {(L1)2ScN(SiHMe2)2} and 1 equiv. of ε-caprolactone, was isolated proving that a coordination-insertion mechanism of ring-opening polymerization was operative. In the polymerization of rac-lactide, yttrium complexes exerted a high degree of stereocontrol producing heterotactic polylactides (P(r) up to 0.91).

Selective detection of ATP and ADP in aqueous solution by using a fluorescent zinc receptor.

We report on the successful use of a new zinc complex for the selective fluorescent detection of ADP and ATP in water. This is achieved by the complementary coordination of the phosphate groups to the metal centre and hydrogen bonding of the adenosine with the coordinated ligand.

A FRET enzyme-based probe for monitoring hydrogen sulfide.

Fluorescently labeled cobalt peptide deformylase (Co-PDF) can be efficiently used as a fluorescence-resonance-energy-transfer-based sensing device for hydrogen sulfide (H(2)S). The proof of concept of our sensor system is substantiated by spectroscopic, structural, and theoretical results. Monohydrogen sulfide coordination to Co-PDF and Ni-PDF was verified by X-ray crystallography. Density functional theory calculations were performed to gain insight into the characteristics of the coordination adduct between H(2)S and the cobalt cofactor in Co-PDF.

Coordination chemistry and reactivity of zinc complexes supported by a phosphido pincer ligand.

The preparation and characterization of new Zn(II) complexes of the type [(PPP)ZnR] in which R = Et (1) or N(SiMe(3))(2) (2) and PPP is a tridentate monoanionic phosphido ligand (PPP-H = bis(2-diphenylphosphinophenyl)phosphine) are reported. Reaction of ZnEt(2) and Zn[N(SiMe(3))(2)](2) with one equivalent of proligand PPP-H produced the corresponding tetrahedral zinc ethyl (1) and zinc amido (2) complexes in high yield. Homoleptic (PPP)(2) Zn complex 3 was obtained by reaction of the precursors with two equivalents of the proligand. Structural characterization of 1-3 was achieved by multinuclear NMR spectroscopy ((1)H, (13)C, and (31)P) and X-ray crystallography (3). Variable-temperature (1)H and (31)P NMR studies highlighted marked flexibility of the phosphido pincer ligand in coordination at the metal center. A DFT calculation on the compounds provided theoretical support for this behavior. The activities of 1 and 2 toward the ring-opening polymerization of ε-caprolactone and of L- and rac-lactide were investigated, also in combination with an alcohol as external chain-transfer agent. Polyesters with controlled molecular parameters (M(n), end groups) and low polydispersities were obtained. A DFT study on ring-opening polymerization promoted by these complexes highlighted the importance of the coordinative flexibility of the ancillary ligand to promote monomer coordination at the reactive zinc center. Preliminary investigations showed the ability of these complexes to promote copolymerization of L-lactide and ε-caprolactone to achieve random copolymers whose microstructure reproduces the composition of the monomer feed.

Heteroscorpionate-based Co2+, Zn2+, and Cu2+ complexes: coordination behavior, aerobic oxidation, and hydrogen sulfide detection.

The coordination behavior and reactivity of the phenol-substituted bis(pyrazolyl)methane ligands, (3,5-(t)Bu(2)-2-phenol)bis(3,5-Me(2)-pyrazol-1-yl)methane (L1-H) and 2-phenol-bis(3,5-Me(2)-pyrazol-1-yl)methane (L2-H) have been investigated in the metal complexes (L1-H)CoCl(2) (1), (L1-H)ZnCl(2) (2), (L3)CuCl(2) (3), (L2)(2)Co(2)Cl(2) (4) (L2-H)ZnCl(2) (5), and (L2-H)CuCl(2)·H(2)O (6). The mononuclear tetrahedral cobalt complex 1 was isolated and fully characterized by X-ray single crystal diffraction and (1)H NMR spectroscopy and relaxometry. The neutral L1-H is κ(2)-coordinated to the metal center whereas the not coordinated hydroxy-phenyl group is involved in extended intermolecular hydrogen bonds. Aerobic oxidation of L1-H was observed in the reaction of this ligand with CuCl(2) to yield the para-quinone derivative L3 (L3 = 2-(t)Bu-6-(bis(3,5-Me(2)-pyrazol-1-yl)methyl)cyclohexa-2,5-diene-1,4-dione). Upon oxidation L3 resulted κ(2)-coordinated to the tetrahedral Cu(II) metal center, affording 3. The reaction of L2-H with CoCl(2)·6H(2)O produced the elimination of 1 equiv of hydrochloric acid and the formation of the binuclear complex 4 in which one cobalt is in an octahedral environment featuring two κ(3)-coordinated deprotonated ligands whereas the second cobalt center is detected in tetrahedral coordination geometry, bound to the octahedral cobalt via two phenoxo bridging moieties. Interestingly L2-H, (3-(t)Bu-2-phenol)bis(3,5-Me(2)-pyrazol-1-yl)methane (L4-H), or (5-(t)Bu-2-phenol)bis(3,5-Me(2)-pyrazol-1-yl)methane (L5-H) were not oxidized in the reaction with CuCl(2). The reaction of the ligand L2-H with ZnCl(2) and CuCl(2)·2H(2)O yielded the κ(2)-coordinated tetrahedral complex 5 and the square planar complex 6, respectively. The application of the cobalt complex 1 as molecular dosimeter for H(2)S was explored and compared to that of the zinc analogue 2. Density functional theory (DFT) calculations and NMR experiments to assess the possible mechanisms of H(2)S detection by both 1 and 2 are also described.